
Schneider TeSys contactor coil price Vapi GIDC

Schneider TeSys Contactor Coil Price Vapi GIDC: A Practical Selection and Buying Guide
Searching for Schneider TeSys contactor coil price Vapi GIDC usually starts with an urgent requirement: a machine has stopped, a starter is chattering, or a panel builder needs matching components before dispatch. The correct quotation depends on more than coil voltage. It requires the complete contactor reference and confirmation that the coil is replaceable.
For Vapi’s process plants, packaging units and manufacturing facilities, identifying the correct component before ordering helps prevent repeat failures and installation delays. Ahmedabad Electrical Corporation supports genuine Schneider Electric switchgear procurement for these requirements across Gujarat and India.
First Check: Replacement Coil or Complete Contactor?
The attached product illustration features TeSys K, Schneider’s compact contactor range. This distinction matters when requesting prices.
Schneider states that TeSys K control coils are not user-serviceable replacement items. For an affected TeSys K contactor, the appropriate procurement route is generally a complete compatible contactor, rather than a loose replacement coil.
Some TeSys D configurations have replaceable coils, but availability and compatibility depend on the exact model and coil technology.
TeSys K: Request a complete contactor quotation against the full reference.
TeSys D/Deca: Check whether Schneider specifies a replacement coil for that configuration.
Electronic-coil versions: Verify the approved replacement arrangement and operating-voltage range.
Older installations: Confirm the current replacement reference and mechanical compatibility.
This initial check prevents a coil-only enquiry from delaying the correct purchase.
Understand Coil Voltage Versus Motor Voltage
A contactor has a power circuit and a control circuit. Their voltages may be different.
For example, a contactor switching a 415 V three-phase motor may use a 24 V DC or 230 V AC control supply. Selecting the coil from the motor voltage would therefore be incorrect.
Before requesting a Schneider contactor price, identify:
The full catalogue number, including its suffix.
Rated coil voltage and whether it requires AC or DC.
Frequency requirements for an AC coil.
Contactor current rating and utilization category.
Number and arrangement of main and auxiliary contacts.
Terminal type and mounting dimensions.
Existing overload relay and interlock arrangement.
A photograph showing only “LC1K09” or “LC1D09” may omit essential coil information. Send clear photographs of the front, side label and coil marking.
What Determines Schneider TeSys Contactor Coil Price?
There is no single price covering every TeSys coil or contactor. A useful quotation identifies exactly what is being supplied.
Pricing depends on:
Product family: TeSys K, TeSys D/Deca or another specified range.
Supply scope: Approved spare coil, complete contactor or assembled starter.
Control specification: Voltage, frequency and conventional or electronic-coil design.
Power rating: Required switching capacity at the operating voltage.
Accessories: Auxiliary contacts, suppressors, interlocks and overload relays.
Quantity: Individual maintenance replacements or repeated OEM requirements.
Commercial terms: Taxes, freight, availability and quotation validity.
Ask suppliers to separate component prices and identify catalogue references. This makes quotations comparable and helps avoid ordering a complete assembly when only an approved spare is required—or the reverse.
Select the Contactor for the Actual Switching Duty
Coil compatibility alone does not establish suitability for the load.
AC-1 duty: Generally applies to non-inductive or slightly inductive loads.
AC-3 duty: Covers typical squirrel-cage motor starting and switching off during running.
Frequent inching or plugging: Requires assessment against the relevant demanding duty.
Reversing applications: Require suitable electrical and mechanical interlocking.
Motor protection: Requires correctly selected overload and short-circuit protective devices.
A contactor’s AC-1 current rating should not be used as its motor-duty rating. Likewise, replacing a coil does not increase the contactor’s switching capacity.
For panel builders, specifying the contactor, overload relay and protective device together supports a coordinated motor-starter arrangement.
Investigate Coil Failure Before Ordering Again
Repeated coil failure can indicate a control-circuit problem. Installing another identical component without addressing the cause may lead to another stoppage.
Have qualified personnel investigate:
Control-voltage dips during contactor pickup.
Loose terminals or poor control-circuit contacts.
Incorrect voltage or frequency.
Excessive enclosure temperature.
Mechanical obstruction preventing full closure.
Unsuitable switching frequency or operating conditions.
For PLC-controlled contactors, verify output compatibility with coil pickup and holding requirements. Use approved interface and suppression arrangements where required. Inspection and replacement should follow isolation procedures and Schneider’s instructions.
Gujarat Delivery Coverage: GIDC Estates and Nearby Clusters
Supply support covers major industrial centres and smaller surrounding manufacturing locations:
Vapi and Valsad: Vapi GIDC, Sarigam, Umargam, Pardi, Dungra and Valsad.
Surat and Navsari: Sachin, Pandesara, Hazira, Ichhapore, Palsana, Kadodara, Navsari and Bilimora.
Bharuch: Ankleshwar, Panoli, Jhagadia, Dahej and Jambusar.
Vadodara: Makarpura, Nandesari, Savli, Waghodia and nearby Halol.
Ahmedabad: Vatva, Naroda, Odhav, Kathwada, Sanand, Changodar, Bavla and Dholka.
North Gujarat: Gandhinagar, Kalol, Chhatral, Mehsana, Kadi, Gozaria and Himmatnagar.
Central Gujarat: Anand, Vithal Udyognagar, Nadiad and Godhra.
Saurashtra: Rajkot, Aji, Bhaktinagar, Metoda, Shapar–Veraval, Morbi, Wankaner, Jamnagar–Dared, Bhavnagar–Chitra and Sihor.
Other locations: Gandhidham, Anjar, Bhuj, Mundra, Surendranagar, Junagadh, Porbandar and Dholera SIR.
These locations include both designated GIDC estates and nearby industrial clusters.
Genuine Schneider Products and Quotation Support
Ahmedabad Electrical Corporation supplies Schneider contactors, motor-protection devices, MCCBs, ACBs, MCBs, control accessories, drives, PLCs and HMIs for industrial and general electrical requirements.
Ready-stock options are confirmed against the exact reference and quantity. Expected delivery is 4–5 days within Gujarat and 5–6 days to major Indian metros, subject to stock and transport conditions.
Pan-India supply includes Mumbai, Navi Mumbai, Pune, Nashik, Delhi NCR, Jaipur, Indore, Bengaluru, Hyderabad, Chennai, Coimbatore and Kolkata.
Send your product photographs, required quantity and delivery postcode for an itemised quotation and confirmed availability.
Frequently Asked Questions
1. Can I buy only a replacement coil for my TeSys K contactor?
Schneider identifies TeSys K coils as non-user-serviceable. Request the complete compatible contactor using its full reference and control-voltage specification.
2. Can a 230 V AC contactor coil operate on 230 V DC?
Not unless the exact product is explicitly rated for both supplies. Matching voltage numbers alone does not establish compatibility.
3. Why does my contactor chatter even after replacement?
Possible causes include low control voltage, loose connections or unstable control signals. Investigate the circuit rather than assuming another contactor will solve the problem.
4. What should a Vapi GIDC buyer send for an accurate quotation?
Provide the complete reference, coil voltage, AC/DC requirement, quantity, application and delivery postcode. State whether you need an approved spare coil or a complete contactor.
Get our brochure for more information.
Contact us:-
Mr. Kush Patel :- +91 99048 14793 & sales@aecswitchgear.com






